+86-0531-88267066 CN EN
Product center Your current location:Home > Product > Other auxiliary equipment series

MJ-600 automatic push table saw
Product description

The main part of the push table saw includes the bed, the work table, the longitudinal section cross section guide plate, the main saw, the line saw, the transmission and other parts. The structure and working principle are much the same as the ordinary circular saw machine, and can be used as the ordinary circular saw machine alone.

The pushing and moving table is the key part of pushing table saw, and it is also the main part which is different from the ordinary circular saw machine.

(1) the operation is light and labor-saving, the driving stroke is large, the cutting width is large;
(2) with a stable and light trailers, smooth operation;
(3) the setting of the moving table and the main saw blade can be adjusted to 45 degrees, expanding the scope of use of the saw machine some saw machines are also equipped with a milling device, can be carried out width between 30-50MM groove and tongue and groove processing.


Operation characteristics of push table saw
Jing zhan cutting board saw through dynamic balance or static balance, generally do not need the foundation, on the flat ground can be added. When processing operation, the workpiece on the moving workbench, manual push the moving workbench, so that the workpiece to achieve feed movement. Operation is very convenient, flexible operation should always pay attention to safety, to prevent the occurrence of accidents.
Main technical parameters of push table saw
The specification of push table saw has become a series, the main parameter is the maximum saw plus length, the general range is 2000 ~ 5000ram our country industry standard JB/ t9950-1999 "with the mobile table woodworking saw machine parameters" T3 specifications 2000mm, 2500mm, 3150mm.


Performance parameters